AWNINGS
Electric Window Controls

LINCO AURA SB24

THE LINCO AURA SB24 – GENERAL INFORMATION

With window profiles becoming smaller and stronger, the need arose for a smaller and more powerful electric chain actuator.

Our latest chain actuator comes with a stainless steel chain that is flexible enough to allow the operator to be fixed in position into the smallest window section, without the need to pivot. The end caps have multiple fixing holes to allow the motor to be fixed from different angles if required, making installation even quicker.

With a pushing and pulling force of 35kg, this actuator can easily operate larger awning sashes on its own. If required it can also be easily pair with a second actuator due to new sync wire technology.

The Aura SB24 has 3 wires instead of the usual 2 wires for DC motors.To sync motors together, simply connect the 3rd sync wires together and both motors will operate together.

Suitable for use with wall switches, radio frequency remote controls and our new phone app. This unit is also suitable for smoke ventilation applications.

LINCO AURA SB24 FEATURES

 

  • 480mm long x 24mm high x 35mm deep
  • Multi—fit mounting points
  • Stainless steel double link chain for strength and durability
  • Simple installation
  • Quiet and smooth motor operation
  • For use on all window frame types
  • Various control options
  • Stroke length of up to 300mm
  • Two motors can be synced for use on large or heavy windows
  • Overload cut-off and limit stop

 

Available from Unique Window Services (07) 3265-5771.

LINCO AURA 230

The Linco Aura Series of motors is a brand new range of electric chainwinders released in the third quarter of 2014.

NEW FEATURE – Auto backup/seal relief

Our Aura 230v is the single chain low voltage motor in this series. The simple lines and small size of the casing means that minimal visual interruption can be achieved for the installation of the motors into the windows. This end result can be further enhanced with the motors able to be painted to match the frame colour for the windows.

Installation is made easy thanks to the multi-point fixing brackets. These brackets allow installation on both a horizontal or vertical surface and everything in between.

With the new style vent brackets we are now able to install these motors into concealed ‘Vantage’ awning window frames. This gives you option to control larger sashes (up to 1500mm wide) in the same style while also creating an easier switching system for the end user and the installer alike.

SPECIFICATIONS: The high level awning windows are to be controlled with the Linco Aura DC electric chain winder. Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6 mm per second. With factory set limit switches and electric overload cut off protection. Actuators to be certified to 10,000 operations.

Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through section. The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.

For smoke ventilation applications actuators require a Failsafe Battery Backup Power Supply. For applications requiring Weather Sensors ,Timers, CO2 Sensors Temp and Humidity Sensor controls the actuators are to used in conjunction with a NV LOGIQ Room Controller.

Available from Unique Window Services (07) 3265-5771.

LINCO AURA DC

The Linco Aura Series of motors is a brand new range of electric chainwinders released in the third quarter of 2014.

NEW FEATURE – Auto backup/seal relief

Our Aura DC is the single chain low voltage motor in this series. The simple lines and small size of the casing means that minimal visual interruption can be achieved for the installation of the motors into the windows. This end result can be further enhanced with the motors able to be painted to match the frame colour for the windows.

Installation is made easy thanks to the multi-point fixing brackets. These brackets allow installation on both a horizontal or vertical surface and everything in between.

With the new style vent brackets we are now able to install these motors into concealed ‘Vantage’ awning window frames. This gives you option to control larger sashes (up to 1500mm wide) in the same style while also creating an easier switching system for the end user and the installer alike.

SPECIFICATIONS: The high level awning windows are to be controlled with the Linco Aura DC electric chain winder. Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6 mm per second. With factory set limit switches and electric overload cut off protection. Actuators to be certified to 10,000 operations.

Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through section. The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.

For smoke ventilation applications actuators require a Failsafe Battery Backup Power Supply. For applications requiring Weather Sensors ,Timers, CO2 Sensors Temp and Humidity Sensor controls the actuators are to used in conjunction with a NV LOGIQ Room Controller.

Available from Unique Window Services (07) 3265-5771.

LINCO AURA TWIN 240

The Linco Aura Series of motors is a brand new range of electric chainwinders released in the third quarter of 2014.

Our Aura Twin 240 is the dual chain 240 volt motor in this series. Being 240 volt the motor can be used in Fire Control and Smoke Ventilation Systems.

This motor suitable for use on any sashes of over 1500mm in width. At this size, the awnings do become very heavy and require a more even application of force. The dual chains mean that the opening and closing force is applied at multiple points to the window and therefore reduces the amount of twisting and tension. If twisting was to occur it can mean that the window will not completely close or open at one end. This also puts more strain on the chain winder as it too will have a lateral force applied to it, a direction it is not designed for.

With the new style vent brackets on the Aura Series we are now able to install these motors into concealed ‘Vantage’ awning window frames. This gives you option to control very large sashes (over 1500mm wide) in the same style while also creating an easier switching system for the end user and the installer alike.

Specification: The awning window controls are to be the ‘Linco Aura Twin 240’, available from Unique Window Services, (07) 3265-5771.

Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6 mm per second. With factory set limit switches and electric overload cut off protection. Actuators to be certified to 10,000 operations.

Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through section. The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.

For smoke ventilation applications actuators require a Failsafe Battery Backup Power Supply. For applications requiring Weather Sensors ,Timers, CO2 Sensors Temp and Humidity Sensor controls the actuators are to used in conjunction with a NV LOGIQ Room Controller.
For BMS control please contact UWS for specific details.

LINCO L4RF

Linco’s fastest electric chainwinder is the L4RF.
Installation is made simple due to the fitted three pin plug and multi fit mounting brackets. When installing the chainwinder the chain will need to be extended to connect to the sash. Until now this has been very difficult to achieve as previous units needed to be hardwired before they could be operated. The three pin plug allows the units to be operated by means of any 240v supply with the appropriate outlet or lead. Once the chainwinder is installed to the sash the electrician can either supply a GPO for each motor or remove the plugs and hardwire them to conceal the wiring in a wall cavity.

Being 240v with an inbuilt Radio Frequency remote control eliminates the need for cumbersome transformers and complex wiring, adding the option of mounting in the factory before delivery to site. With a range of thirty (30) metres the RF control will allow the windows to be operated from almost any position in a room or hall.

Suitable for awning windows with an area approaching one square metre the slimline design of the casing will not detract from  any environment it is installed in. Based on the other ever reliable Linco chainwinders this new edition is sure to give years of simple and easy operation.

SPECIFICATION: The automated windows are to be fitted with the LINCO L4RF 240 volt electric chain winders.

Each actuator is to have a one piece extruded aluminium housing with stainless steel mounting brackets to connect to the window frames and sashes. Actuators are to have a double link stainless steel chain and be capable of achieving 10,000 double strokes with a driving force of 600N and a speed of 12mm per second. Each zone is be controlled with the use of one hand held transmitter and can be pre programmed before installation.

All associated cabling ,ducting and connections are to be concealed where possible and are to be carried out by the electrical contractor.

The actuators are available from Unique Window Services, (07) 3265-5771.

loading