The Linco Aura Series of motors is a brand new range of electric chainwinders released in the third quarter of 2014.

NEW FEATURE – Auto backup/seal relief

Our Aura DC is the single chain low voltage motor in this series. The simple lines and small size of the casing means that minimal visual interruption can be achieved for the installation of the motors into the windows. This end result can be further enhanced with the motors able to be painted to match the frame colour for the windows.

Installation is made easy thanks to the multi-point fixing brackets. These brackets allow installation on both a horizontal or vertical surface and everything in between.

With the new style vent brackets we are now able to install these motors into concealed ‘Vantage’ awning window frames. This gives you option to control larger sashes (up to 1500mm wide) in the same style while also creating an easier switching system for the end user and the installer alike.

SPECIFICATIONS: The high level awning windows are to be controlled with the Linco Aura DC electric chain winder. Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6 mm per second. With factory set limit switches and electric overload cut off protection. Actuators to be certified to 10,000 operations.

Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through section. The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.

For smoke ventilation applications actuators require a Failsafe Battery Backup Power Supply. For applications requiring Weather Sensors ,Timers, CO2 Sensors Temp and Humidity Sensor controls the actuators are to used in conjunction with a NV LOGIQ Room Controller.

Available from Unique Window Services (07) 3265-5771.

The Linco Aura Series of motors is a brand new range of electric chainwinders released in the third quarter of 2014.

Our Aura Twin 240 is the dual chain 240 volt motor in this series. Being 240 volt the motor can be used in Fire Control and Smoke Ventilation Systems.

This motor suitable for use on any sashes of over 1500mm in width. At this size, the awnings do become very heavy and require a more even application of force. The dual chains mean that the opening and closing force is applied at multiple points to the window and therefore reduces the amount of twisting and tension. If twisting was to occur it can mean that the window will not completely close or open at one end. This also puts more strain on the chain winder as it too will have a lateral force applied to it, a direction it is not designed for.

With the new style vent brackets on the Aura Series we are now able to install these motors into concealed ‘Vantage’ awning window frames. This gives you option to control very large sashes (over 1500mm wide) in the same style while also creating an easier switching system for the end user and the installer alike.

Specification: The awning window controls are to be the ‘Linco Aura Twin 240’, available from Unique Window Services, (07) 3265-5771.

Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6 mm per second. With factory set limit switches and electric overload cut off protection. Actuators to be certified to 10,000 operations.

Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through section. The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.

For smoke ventilation applications actuators require a Failsafe Battery Backup Power Supply. For applications requiring Weather Sensors ,Timers, CO2 Sensors Temp and Humidity Sensor controls the actuators are to used in conjunction with a NV LOGIQ Room Controller.
For BMS control please contact UWS for specific details.

Linco’s fastest electric chainwinder is the L4RF.
Installation is made simple due to the fitted three pin plug and multi fit mounting brackets. When installing the chainwinder the chain will need to be extended to connect to the sash. Until now this has been very difficult to achieve as previous units needed to be hardwired before they could be operated. The three pin plug allows the units to be operated by means of any 240v supply with the appropriate outlet or lead. Once the chainwinder is installed to the sash the electrician can either supply a GPO for each motor or remove the plugs and hardwire them to conceal the wiring in a wall cavity.

Being 240v with an inbuilt Radio Frequency remote control eliminates the need for cumbersome transformers and complex wiring, adding the option of mounting in the factory before delivery to site. With a range of thirty (30) metres the RF control will allow the windows to be operated from almost any position in a room or hall.

Suitable for awning windows with an area approaching one square metre the slimline design of the casing will not detract from  any environment it is installed in. Based on the other ever reliable Linco chainwinders this new edition is sure to give years of simple and easy operation.

SPECIFICATION: The automated windows are to be fitted with the LINCO L4RF 240 volt electric chain winders.

Each actuator is to have a one piece extruded aluminium housing with stainless steel mounting brackets to connect to the window frames and sashes. Actuators are to have a double link stainless steel chain and be capable of achieving 10,000 double strokes with a driving force of 600N and a speed of 12mm per second. Each zone is be controlled with the use of one hand held transmitter and can be pre programmed before installation.

All associated cabling ,ducting and connections are to be concealed where possible and are to be carried out by the electrical contractor.

The actuators are available from Unique Window Services, (07) 3265-5771.

The SECO N 24 25 chain actuator is a high quality, cost effective chain drive designed and manufactured by SE Controls and tested to EN 61000-6-1 & 2.

Electronically defined closing force ensures a tight close on each operation and the SECO N24 25 is available in standard or bespoke body lengths addition to stroke finish and flex lengths/type variations.

Features Include:

• Standard Finish – RAL9006 (Silver Grey)
• Slim and distinctive grooved enclosure
• Flexible bracket range to suit all vent applications
• Soft close available via adjustable zero point setting
• Seal Relief, programable up to 20mm
• Virtually silent operation with selectable speed control (<4 dB in test chamber conditions with background at 35dB)
• Warranty – 2 years/15,000 cycles
• BMS simualtion tested to 500,000 cycles
• Intelligent variants to follow
• Optional volt free signal output

SPECIFICATION: Awning sashes to be electronically operated by ‘SECO N 24 25’, 24vDC programmable electric chain winder from Unique Window Services (07-3265-5771).

Electric chain winders to have project specific requirements set prior to installation which can include, but not are limited to: Speed, Operational Stroke, Seal Relief, Soft Close and <4dB rating.

Electric chain winder to be certified and warranted to at least 15,000 strokes (noted through operational frequency logging), include project specific mounting brackets and Stainless Steel chain.

Compact and neat, the use of these motors in any design will not detract from the overall appearance or clean lines created by your windows. The motor is under 350mm long and only 30mm in height.

Being a low voltage chain winder this allows the wiring to be concealed into the aluminium frame as shown in the photo opposite. The casing of the motor comes in a standard anodised finished, however it can be colour matched to your special requirements.

With mounting brackets that allow installation to almost any angle created by the mounting surface, no matter the design of the sill the chain winder will function as desired. This bracket makes it very easy to install which makes supply only a great option.

If you are looking for a small, reliable and versatile way to automate your awning windows the Linco L2 series is sure to satisfy your requirements.

Specification: The awning window controls are to be the ‘Linco L2’, available from Unique Window Services, (07) 3265-5771.

The actuators are to have a set stroke of 300mm and a double link stainless steel chain, thermal overload cut out protection and to be certified to 10,00 double strokes. All associated power supplies and controls are to be concealed into wall cavities or specially allocated enclosures with easy access for servicing. The awning controls are to have wall mounted switches located at a specified height and are to be a momentary contact bell press type only.

For BMS control please contact UWS for specific details.

The Linco L3 is our 240 volt single chain chainwinder and has a stroke of up to 300mm. Whether it is a single awning or a large bank of them, the control of your high level awning windows has never been as easy, flexible or attractive.

The slimline design of the Linco series of chain winders makes the motors far more aesthetically appealing, or easily incorporated into the window frames!

Control of the motors can be via the standard wall mounted switches, via a hand held remote or through the various ‘Smart’ systems available. Whether you are leaving the office and want your home cool before you arrive or a storm is coming and you need the windows closed as the line at the supermarket is not moving, it is now all possible with the automated systems on offer.

The Linco L series all come with stainless steel chains so that strength and durability are assured for years to come, even in high salt areas close to the beach! Supplied with brackets that allow attachment to either a horizontal or vertical surfaces no building design is a problem for installation and can be easily achieved.

Specification: The high level awning windows are to be  controlled with the Linco L3 electric chain winder. Actuators to have a locking force of 600N, double link stainless steel chain with a predetermined stroke length of 300mm. Actuators to have a load capacity of 250N and a stroke speed of 6mm per second, with factory set limit switches and electric overload cut off protection.

Actuators to be certified to 10,000 operations. Window fabricators are to pre punch holes in fly screen adapters to allow chain to pass through the section.

Product is available from Unique Window Services (07) 3265-5771.

The electrical contractor is to provide all relevant cabling, connections and switching. Please refer to the associated wiring instructions for this product.